Filter
Top Products
1 - 2
LED Safety
LED Safety Statement
The LED output on this device has been tested in accordance with IEC60825-1 LED safety and certified
to be a Class 1 LED device.
The maximum power outputs for each diode are as follows:
• Illumination LED: 194.0 uW, wavelength: 626nm+/-30nm
• Aimer laser (5300 engine): 360.1 uW, wavelength: 655nm
• Aimer LED (5100 engine): 81.6 uW, wavelength: 526nm+/-30nm
Infrared LED Safety Statement
CAUTION! Do not view directly with optical instruments.
The maximum power outputs for the IR LED is 145.1 uW. LEDs are pulsed at a frequency of 115,200 Hz
with a duty cycle of 18.75% where the "ON" time of a single pulse is 1.6275 x 10-6 seconds.
UL and C-UL Statement
UL and C-UL listed: UL60950-1 2nd Edition and CSA C22.2 No. 60950-1-07 2nd Edition.
Approvals by Country
This Class 2 Laser Product is in accordance with the requirements of IEC 60825-1 Ed. 2 Clause 6.2(a).
Country EMC, Radio, & SAR Safety
U.S.A. FCC Part 15, Subpart B
FCC Part 15, Subpart C, 15.247
FCC Part 15, Subpart E
FCC Part 22H
FCC Part 24E
FCC SAR OET 65 Supplement C
UL60950-1 2nd Edition
Canada ICES-003 (Class B)
RSS 132
RSS 133
RSS 210
CSA C22.2 No. 60950-1-07 2nd
Edition
European Community/CE EN300328, EN301893, EN55022,
EN55024, EN301489-1, EN301489-7/24
EN301489-17, EN300328,
3GPPTS 51.010-1
EN301511, EN301908, EN50360,
EN50361, EN50371, EN50392
IEC6220-1 and IEC6220-2, EN300440
EN/IEC60950-1 2nd Edition
EN/IEC60825-1 2nd Edition