Filter
Top Products
13 - 5
5. Secure the mounting bracket to the appropriate location.
Back Panel
Latch
The latch sits on top of the spring arm assembly and holds the back of the terminal securely in
place.
Spring Arm Assembly
The spring arm assembly is the column that connects the latch to the back of the base.
Ball Joints
There are two ball joints: one on the back of the base and one on the mounting bracket. Both
ball joints are inserted into the bracket and secured to mount the base.
Connectors
The power and RS232 connectors are located on the bottom panel.
For more information, see Bottom Panel on page 13-3.
Brackets
Bracket
The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and
secured with the turnscrew.
Turnscrew
The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen
the ball joint slots.
Turnscrew
Power supply and RS232
connectors (not in view)
Mounting Bracket
Ball Joint
Bracket
Latch (not in view)
Spring Arm Assembly
Base
Ball Joint