User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router 2 Connecting Your Device
7
2 Connecting Your Device
2.1 Overview
This chapter provides basic instructions for connecting the ADSL router to a computer
or LAN.
This chapter assumes that you have already established a DSL service with your
Internet service provider (ISP). These instructions provide a basic configuration that
should be compatible with your home or small office network setup. Refer to the
subsequent chapters for additional configuration instructions.
When selecting a location for the ADSL router, allow ample clearance to access the
connections on the rear panel. For convenience, try to place the ADSL router near your
computer so you can monitor the LED indicators. Allow some space above the ADSL
router for ventilation to avoid problems with overheating.
The diagram below illustrates the hardware connections. Refer to the steps that follow
for specific instructions.
Telephone
Desktop PC
Internet Wall plug
Aolynk ADSL2+ Router
NoteBook
Splitter
LINE
ADSL PHONE
Figure 2-1 Hardware connections
2.2 Steps
1) Connect the DSL cable and optional telephone