Filter
Top Products
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router 5 Configuring Your Computers
53
5.2 Configuring a PC Connected by USB Port
5.2.1 Connecting a Computer to the USB Port by a USB cable
If you use the ADSL router’s USB port to connect to a PC, you must install the provided
USB driver on the PC. The driver enables Ethernet-over-USB communication with the
ADSL router.
5.2.2 Installing the USB Driver
Ensure that the USB function of your PC is OK.
The Microsoft Windows 98, 98 SE, ME, 2000, and XP support this driver. The following
installation instruction is based on Windows XP; you may refer to it when operating on
other operating systems.
1. Insert the driver CD to your CDROM.
The CD shipped with the ADSL router contains the USB drivers. Insert it into your PC’s
CDROM.
2. Plug the USB cable from the device into the USB port of the PC.
The USB cable provided has a flat connector on one end (called Type A) and a square
connector on the other (Type B). Connect the flat connector to your PC and the square
connector to the ADSL router.
To ADSL-
Ethernet router
To PC
Figure 5-1 USB port outline
Plug the USB cable from the device into the USB port of the PC. The PC will detect the
newly-attached device and display the Found New Hardware Wizard dialog box: