Huawei Aolynk DR811 Network Router User Manual


 
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router 5 Configuring Your Computers
51
6) Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the
Network Protocols list box.
7) Click OK to return to the Network dialog box, and then click OK again. You may be
prompted to install files from your Windows 95/98 installation CD. Follow the
instructions to install the files.
8) Click OK to restart the PC and complete the TCP/IP installation. Next, configure
the PCs to accept IP information assigned by the ADSL router:
9) Open the Control Panel window, and then click the Network icon.
10) Select the network component labeled TCP/IP, and then click Properties. If you
have multiple TCP/IP listings, select the listing associated with your network card
or adapter.
11) In the TCP/IP Properties dialog box, click the IP Address tab.
12) Click the radio button labeled Obtain an IP address automatically.
13) Click the DNS Configuration tab, and then click the radio button labeled Obtain an
IP address automatically.
14) Click OK twice to confirm and save your changes. You will be prompted to restart
Windows.
15) Click Yes.
5.1.6 Windows NT 4.0 Workstations
First, check for the IP protocol and, if necessary, install it:
1) In the Windows NT task bar, click the Start button, point to Settings, and then click
Control Panel.
2) In the Control Panel window, double click the Network icon.
3) In the Network dialog box, click the Protocols tab.
The Protocols tab is displayed with a list of currently installed network protocols. If
the list includes TCP/IP, then the protocol has already been enabled. Skip to step
9.
4) If TCP/IP is not displayed as an installed component, click Add.
5) In the Select Network Protocol dialog box, select TCP/IP, and then click OK.
You may be prompted to install files from your Windows NT installation CD or other
media. Follow the instructions to install the files.
After all files are installed, a window appears to inform you that a TCP/IP service
called DHCP can be set up to dynamically assign IP information.
6) Click Yes to continue, and then click OK if prompted to restart your computer.
Next, configure the PCs to accept IP information assigned by the ADSL router:
7) Open the Control Panel window, and then double-click the Network icon.
8) In the Network dialog box, click the Protocols tab.
9) In the Protocols tab, select TCP/IP, and then click Properties.
10) In the Microsoft TCP/IP Properties dialog box, click the radio button labeled Obtain
an IP address from a DHCP server.