Filter
Top Products
User Manual
Aolynk DR811/DR814 ADSL2+Broadband Router 4 Web-based Management
36
Figure 4-27 SNTP setting
This page allows you to:
l View the current status about system time configuration.
l Configure NTP servers on the Internet to which the ADSL router is able to
synchronize its internal clock.
To synchronize the local time with the SNTP server, go to the top of the page and click
the button.
To add a NTP Server, enter the IP Address or the domain name of the SNTP server at
the SNTP Server Configuration Parameters section of the page and click on the
button.
To delete an existing NTP Server, click the corresponding button.
To set the timezone, position the cursor over the relevant entry from the timezone
drop-down list and left-click to select it, and then click the button.
4.13 ZIPB
ZIPB stands for "Zero Installation PPP Bridge". It is a way to ensure that a home user
can be assigned a public IP address through the router, and to resolve the problem that
all SOHO routers with NAT enabled cause part of the application unable to function
normally.
Click Service in the Main menu and choose the ZIPB tab in the Main Frame to open the
ZIPB configuration page.