10
2.3 Powering On the HG532s
After connecting the cables, press the On/Off button on the side panel to power
on the HG532s.
After you power on the HG532s, the Power indicator light turns on.
−
When connecting cables using the ADSL port, The ADSL indicator lights up
and starts blinking. This indicates that the asymmetric digital subscriber line
(ADSL) port activation is in progress. The blinking may last from 40 seconds
to 3 minutes. When the ADSL indicator stops blinking and remains on, the
HG532s is working properly.
−
When going online using the USB port, the USB indicator light turns on.
This indicates that the HG532s is working properly. When the USB indicator
light starts blinking, data is being transmitted between the HG532s and the
connected device.
To power off the HG532s, press the On/Off button on the side
panel, and then unplug the power adapter.