Filter
Top Products
28
click Remove.
5. Delete all the other wireless network connections from the
Preferred Networks area.
6. Click OK.
Step 2 Set up an unencrypted wireless network connection.
Does the WPS function have any special requirements on the wireless
encryption settings of the HG532s?
The WPS function can be used only when the security mode of the wireless
network is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and the
SSID is set to SSID1. It is recommended that you set the security mode to
WPA-PSK/WPA2-PSK.
What can I do if I cannot set up a wireless connection between the HG532s
and the computer by pressing the WPS button?
Step 1 Check that only one computer tries to connect to the HG532s using
the WPS function at a time.
Step 2 Check that the wires network function and the WPS function in PBC
mode are enabled on the HG532s.
Step 3 Check that the security mode of the wireless network is set to
WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and SSID is
set to SSID1.
Note that the WPS function is forcibly disabled if the wireless
network uses the Wired Equivalent Privacy (WEP) encryption.
Step 4 Check the positions of the HG532s and the computer. Ensure that
they are far from the electric appliances such as microwave ovens,
refrigerators, or cordless telephones that generate strong magnetic
or electric fields.
Step 5 Place the HG532s in an open area.
Although radio signals can pass through obstacles, their
transmission is affected if they pass through too many obstacles
such as walls.