Filter
Top Products
12
3.2 Configuring a Wireless Account
The configuration wizard page is displayed when wireless parameters have not
been modified. To set the wireless network name and password for wireless
connections on the wizard page, do as follows:
Step 1 Log in to the HG532s's web-based configuration utility.
Step 2 In the displayed Quick Configure Home Gateway: Wireless
Network page. Set WLAN SSID and Key, and click Next.
After you set the wireless network name and password, the home page of
the web-based configuration utility is displayed. A navigation menu is displayed
on the left.
3.3 Configuring a Dial-Up Connection for Internet
Access
The HG532s works in bridge mode by default. To set up a dial-up connection for
Internet access, you must install and configure PPP dial-up software. The
following example uses a computer running the Windows XP operating system
to describe how to set up a dial-up connection:
Step 1 Choose Start > All Programs > Accessories > Communications >
Network Connections.
Step 2 In Network Tasks, click Create a new connection. In the New
Connection Wizard window, click Next.
Step 3 Select Connect to the Internet, and click Next.
Step 4 Select Set up my connection manually, and click Next.
Step 5 Select Connect using a broadband connection that requires a user
name and password, and click Next.
Check the label on the HG532s's rear panel for SSID and WLAN
Key. The preceding configuration needs to be performed only once.
You can also configure the wireless network name and password by
choosing Basic > WLAN. For details, see section
6.3 "Changing the
Wireless Network Name and Password
".