26
If the problem persists, restore the HG532s to its default settings.
For details, see "How can I quickly restore the HG532s to its default
settings?"
What can I do if I cannot access the Internet over a wireless connection?
Step 1 Check that all cables are securely connected, such as the power
adapter cable and the telephone line.
Step 2 Check whether the WLAN indicator is on.
If the WLAN indicator is off, the wireless network function is
disabled, and you need to turn on the wireless network function.
Step 3 Read the user guide of the wireless network adapter, and
check whether the wireless network adapter supports the 802.11b,
802.11g, or 802.11n protocol.
If the wireless network adapter does not support any of the
preceding protocol, replace it.
Step 4 Check whether the driver for the wireless network adapter is
correctly installed.
If the driver is not correctly installed, re-install it using the driver
program provided with the wireless network adapter.
Step 5 Check whether the computer receives wireless signals properly.
The following example uses the computer running the Windows XP
operating system to check wireless signal reception:
1. Choose Start > Control Panel. Double-click Network
Connections.
2. In the Network Connections window, right-click Wireless
Network Connection, and choose V
iew Available Wireless
Networks.
If the computer cannot find the wireless network, move the
computer closer to the HG532s. Check that there are no obstacles,
such as walls, between the computer and the HG532s.
Step 6 Check whether the computer is connected to the HG532s's wireless
network. On the wireless network list, check whether the
HG532s's wireless network is displayed as Connected.
Step 7 Check that PPP dial-up software is installed and parameters are set
correctly.