Filter
Top Products
Configur
a
42
Internet IP Sub-menu
The Internet IP sub-menu (see figure 0-11) is used to configure the IP related parameters of the Internet
connection. For most Internet application, the un-numbered interface based configuration is appropriate.
You need only to specify a remote IP address, instead of a pair of IP addresses for local end and remote
end of the IP connection.
Remote SNMP Enable
This check box is to enable or disable SNMP management from remote. If disabled, the ISDN router will
only respond to the SNMP requests from the local Ethernet.
IP Enable
This parameter is to enable or disable the IP routing function. If IP routing is disabled, bridging must be
enabled for IP packet to be forwarded through the router. Bridging is rarely used as the protocol for
Internet access.
IP Address of Remote Ethernet
The remote IP address is the IP address of the remote router located at your ISP site. The IP address is
entered in the standard IP address format of a.b.c.d. The remote IP address is required during PPP
negotiation. Please ask from your ISP if you don’t possess one.
Figure 0-9, Internet IP Window