Hypertec ISDN 10T Router Network Card User Manual


 
Introduction
5
A schematic of how the Hypertec ISDN Router is used is shown in Figure 0-2 A Hypertec ISDN Router
Application.
Figure 0-2 A Hypertec ISDN Router Application
The Hypertec ISDN Routersupports the following features:
ISDN
U or ST interfaces
Switched ISDN service for various switches worldwide :
National ISDN, ATT 5ESS, DMS switches in North America
EuroISDN(ETSI) switches in Europe
NTT switches in Japan
EuroISDN switches in Taiwan, Singapore
ATT 5ESS switches in Korea
Detailed accounting including dialed numbers, disconnect causes, frame statistics
Auto Dial-out triggered by outgoing LAN traffic, auto disconnect due to inactive connection
Bandwidth-On-Demand, 0<->1<->2 bandwidth management,1B to 2B if traffic increases
beyond threshold,. 2B to 1B if traffic falls below threshold, 1B to 0B if traffic is idle for more
than an pre-defined period
Ethernet
4 port Ethernet Repeater with unlimited LAN users
Internet/Intranet
PPP, MultiLink PPP (MLPPP), LCP, IPCP, IPXCP, and BCP
Internet and Intranet connection profiles. Allows one B channel for Internet connection and the
other B channel for intranet connection
STAC LZS data compression with 128 KPBS -> 512 KBPS, 4:1 compression ratio on normal
text file
Static or dynamic IP address assignment
Static or dynamic IP Route