Filter
Top Products
To install the IBM 2X/4X/24X CD-ReWritable Drive Option Diskette
device drivers for Windows 98, Windows 95, Windows 3.x, OS/2 or
DOS:
1. Insert the IBM 2X/4X/24X CD-ReWritable Drive Option Diskette
into the diskette drive.
2. Type A:CDSETUP in a command line and press Enter.
3. Click Setup.
4. Follow the on-screen instructions to install the software.
5. Click Exit after software installation completes.
6. Restart your computer so the new settings take effect.
Windows NT 4.0 will automatically detect the presence of the drive.
No additional steps are required to activate the device drivers.
Some IBM Windows NT pre-loads contain a piixide device driver.
This device driver replaces the Windows NT native atapi device
driver, and provides DMA support. The drive will not work if both
the atapi and piixide device drivers are enabled at the same time. If
both device drivers are enabled at the same time, go into the Control
Panel and set the Startup parameter of one of the drivers to Disabled.
For optional information about configuring the IBM 2X/4X/24X
CD-ReWritable Drive Option Diskette device drivers for Windows 3.x,
DOS, OS/2, Windows 98, and Windows 95, go to Appendix C,
“Customizing device driver configuration settings” on page 3-13.
Part 1: Quick installation guide 1-11