Filter
Top Products
2.5 Installing the Device Drivers and Utility Programs
A README.TXT file on the SSA RAID Adapter diskette for your operating system provides detailed instructions on installing the
device drivers.
Unless you have just installed an operating system, you must configure your disk arrays before you can use them with your system.
Chapter 3, "Configuring SSA Subsystems" in topic 3.0 describes how to do this.
When you have configured your disk arrays, the SSA subsystem will be ready for use with your system.
The format in which the Event/Error Logger reports errors is controlled by the file EVNCTRLF.TXT in the install directory (which, by
default, is c:\issa). Details of the settings and how to change them are contained in the header of the control file.
SSA RAID Adapter Installation and User's Guide.
Installing the Device Drivers and Utility Programs
_ Copyright IBM Corp. 1996
2.5 - 1