Filter
Top Products
C.2.5.4 Rebuilding State
A disk array enters Rebuilding state after a missing disk has been replaced. When the disk array is in this state, all the member disk
drives are present, but the data and parity are being rebuilt on the replaced disk drive. The array management software allows read
and write operations on a disk drive that is in Rebuilding state. If the power fails before the rebuilding is complete, the array
management software continues the rebuilding operation when the power returns for those strips not yet rebuilt.
SSA RAID Adapter Installation and User's Guide.
Rebuilding State
_ Copyright IBM Corp. 1996
C.2.5.4 - 1