Filter
Top Products
3.3 Creating an Array
This section describes how to create an array from the free disk drives in the SSA subsystem.
It is recommended that you define one or more hot spares (refer to "Defining a Hot Spare" in topic 5.1 for how to do this) before
creating the first array on an adapter.
To create an array:
1. From the Main Menu screen, select SSA Adapter List.
2. The SSA Adapter List window opens:
+----------------------------------------------------------------------------------+
¦ ¦
¦ ¦
¦ +-----------------------------------------------------------------------+ ¦
¦ ¦CONFIG SSA Configurator and Service Aids Vyymmdd XX Version¦ ¦
¦ +-----------------------------------------------------------------------+ ¦
¦ +----------------------------+ ¦
¦ ¦ Main Menu ¦ ¦
¦ +----------------------------¦ ¦
¦ ¦ ¦ ¦
¦ ¦ New Disks ¦ ¦
¦ ¦ Free Resources ¦ ¦
¦ ¦ Syst+-----------------------------------------+ ¦
¦ ¦ SSA ¦ SSA Adapter List ¦ ¦
¦ ¦ Even+-----------------------------------------¦ ¦
¦ ¦ Serv¦ Bus X Device Y Slot Z Adapter (Q) ¦ ¦
¦ ¦ Abou¦ Bus X Device N Slot T Adapter (S) ¦ ¦
¦ ¦ ¦ ¦ ¦
¦ ¦ +-----------------------------------------+ ¦
¦ ¦ ¦ ¦
¦ ¦ ¦ ¦
¦ +----------------------------+ ¦
¦ +----------------------------------------------------------------+ ¦
¦ ¦<ESCAPE> Exit <ENTER> Select <F1> Help ¦ ¦
¦ +----------------------------------------------------------------+ ¦
¦ ¦
¦ ¦
+----------------------------------------------------------------------------------+
Select the adapter that is to control the array. The disk drives that you define as members of the array must be connected to this
adapter.
3. The Adapter Menu window opens:
+----------------------------------------------------------------------------------+
¦ ¦
¦ ¦
¦ +-----------------------------------------------------------------------+ ¦
¦ ¦CONFIG SSA Configurator and Service Aids Vyymmdd XX Version¦ ¦
¦ +-----------------------------------------------------------------------+ ¦
¦ +----------------------------+ ¦
¦ ¦ Main M+------------------------------------------+ ¦
¦ +--------------¦ Bus X Device Y Slot Z Adapter (Q) ¦ ¦
¦ ¦ +------------------------------------------¦ ¦
¦ ¦ New Disks ¦ RAID-0 Arrays ¦ ¦
¦ ¦ Free Resour¦ RAID-1 Arrays ¦ ¦
¦ ¦ Syst+------¦ RAID-5 Arrays ¦ ¦
¦ ¦ SSA ¦ ¦ Rejected Disks ¦ ¦
¦ ¦ Even+------¦ Non-Volatile RAM ¦ ¦
¦ ¦ Serv¦ Bus X¦ Hot-spare Disks ¦ ¦
¦ ¦ Abou¦ Bus X¦ Run Concurrent Diagnostics ¦ ¦
¦ ¦ ¦ ¦ Run Non-Concurrent Diagnostics ¦ ¦
¦ ¦ +------¦ View Adapter VPD ¦ ¦
¦ ¦ ¦ Disk Service Aids ¦ ¦
¦ ¦ +------------------------------------------+ ¦
¦ +----------------------------+ ¦
¦ +----------------------------------------------------------------+ ¦
¦ ¦<ESCAPE> Exit <ENTER> Select <F1> Help ¦ ¦
¦ +----------------------------------------------------------------+ ¦
¦ ¦
¦ ¦
+----------------------------------------------------------------------------------+
SSA RAID Adapter Installation and User's Guide.
Creating an Array
_ Copyright IBM Corp. 1996
3.3 - 1