IBM 32H3816 Network Card User Manual


 
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ 50007 ¦ The IOCC detected an internal ¦ Exchange the adapter card ¦
¦ ¦ error. ¦ for a new one or call for ¦
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ 50008 ¦ Unable to read or write the ¦ Exchange the adapter card ¦
¦ ¦ PCI registers. ¦ for a new one or call for ¦
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ 50010 ¦ An SSA adapter or device ¦ Call for service ¦
¦ ¦ drive protocol error has ¦ ¦
¦ ¦ occurred. ¦ ¦
+---------+-------------------------------+------------------------------¦
¦ 50012 ¦ The SSA adapter microcode has ¦ Call for service ¦
¦ ¦ hung. ¦ ¦
+---------+-------------------------------+------------------------------¦
¦ D4000 ¦ The diagnostics cannot ¦ Exchange the adapter card ¦
¦ ¦ configure the SSA adapter. ¦ for a new one or call for ¦
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ D4100 ¦ The diagnostics cannot open ¦ Exchange the adapter card ¦
¦ ¦ the SSA adapter. ¦ for a new one or call for ¦
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ D4300 ¦ The diagnostics have detected ¦ Exchange the adapter card ¦
¦ ¦ an SSA adapter POST failure. ¦ for a new one or call for ¦
¦ ¦ ¦ service ¦
+---------+-------------------------------+------------------------------¦
¦ DFFFF ¦ A command or parameter that ¦ Call for service ¦
¦ ¦ has been sent or received is ¦ ¦
¦ ¦ not valid. This problem is ¦ ¦
¦ ¦ caused either by the SSA ¦ ¦
¦ ¦ adapter, or by an error in ¦ ¦
¦ ¦ the microcode. ¦ ¦
+------------------------------------------------------------------------+
Subtopics
B.1 SSA Loop Configurations that Are Not Valid
SSA RAID Adapter Installation and User's Guide.
Appendix B. SSA RAID Adapter Service Request Numbers
_ Copyright IBM Corp. 1996
B.0 - 4