IBM 32H3816 Network Card User Manual


 
D.4.7 EC Council Directive
This product is in conformity with the requirements of the following EC directives:
 Council Directive 73/23/EEC on the harmonization of the laws of the Member States relating to electrical equipment designed for
use within certain voltage limits.
 Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility
Neither the provider or the manufacturer can accept responsibility for any failure to satisfy the protection requirements resulting
from a non-recommended modification of the product, including the fitting of option cards not supplied by the manufacturer.
This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to
CISPR 22 / European Standard EN 55022. The limits for Class A equipment were derived for commercial and industrial
environments to provide reasonable protection against interference with licensed communication equipment.
Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Properly shielded and grounded cables and connectors (part numbers 07H9163, 07H8985, 88G6403, 88G6404, 31H7962, or
88G6406, or their equivalents) must be used in order to reduce the potential for causing interference to radio and TV
communications and to other electrical or electronic equipment. Such cables and connectors are available from the provider or
manufacturer. Neither the provider or manufacturer can accept responsibility for any interference caused by using other than
recommended cables and connectors.
SSA RAID Adapter Installation and User's Guide.
EC Council Directive
_ Copyright IBM Corp. 1996
D.4.7 - 1