Filter
Top Products
Appendix A: Configuration
452 Netcool/Proviso Cisco IP Telephony Technology Pack User’s Guide, Version 4.3-W
15. Ensure that the Bulk input files can be read.
To verify that the UBA application can read the Bulk input files, follow these steps:
15-a. Place a Bulk input file at the source input location.
— (443 only) The source input location for Bulk input files is specified using the URI parameter from the
pack’s XSD file, which you can view using the Topology Editor.
— (Pre-443 only) The source input location for Bulk input files is specified using the URI parameter from
the template file, which you added to the
dc.cfg file in a previous step.
Within the configured file retrieval interval (typically, five minutes), the UBA application retrieves the
Bulk input file and copies it to the following directory:
DATA_CHANNEL_HOME/UBA.<channel>.<collector>/<instance>/do/
where:
The UBA application then processes the Bulk input file according to the instructions in the Bulk Adaptor
Design File.
Note: The first time that the UBA processes a Bulk input file, it passes a metric to the CME. The CME
rejects this metric as a BAD_METRIC because the metric does not have an associated grouped sub-element prior
to the time this metric is recorded. This is expected behavior. The CME accepts metrics from the Bulk input files
after the inventory is run.
15-b. Ensure that the UBA application can successfully read the Bulk input file you copied into the source
input location by issuing a tail utility command similar to the following:
The UBA application connects to the database. This event causes a message similar to the following to
display:
DB_CONNECT Connecting to <sid> as
<user>
If you see this database connection message without prior
errors, the UBA application has passed the syntax check.
Event Meaning
Variable Meaning
DATA_CHANNEL_HOME Is /opt/datachannel, by default.
<channel> Specifies the channel number (for example, 1) you
specified when configuring this DataChannel.
<collector> Specifies the collector number (for example, 100) you
specified when configuring this UBA Bulk Collector.
<instance> (443 only) Specifies the string for the INSTANCES parameter in the
pack’s XSD file. Typically, this string represents the name
of the pack and is read-only. You can view the string
specified for INSTANCES using the Topology Editor.
<instance> (pre-443 only) Specifies the string for the INSTANCES parameter in the
pack’s template file. You were instructed to copy this
parameter to the dc.cfg file in a previous step.