A SERVICE OF

logo

Open as PDF
next previous
III. Host Serial Connection
A. Pin connections for the 9 pin D-subminature female connector on the rear connection panel of
the CF scanner.
1. The scanner Transmits data from pin #2.
2. The scanner Receives data on pin #3.
3. The signal ground is pin #5
B. Cable requirements for using PC type serial ports with the CF scanner.
1. If the PC has a 9 pin D-subminature male connector use the following connections.
a. Scanner pin #2 to PC pin #2.
b. Scanner pin #3 to PC pin #3.
c. Scanner pin #5 to PC pin #5.
2. If the PC has a 25 pin D-subminature male connector use the following connections
a. Scanner pin #2 to PC pin #3.
b. Scanner pin #3 to PC pin #2.
c. Scanner pin #5 to PC pin #7.