Filter
Top Products
The prompt, “Pixels/Inch:”, will appear. Enter the number of pixels resolved per inch in
decimal followed by a <CR>.
At this point, the prompt “Display String:” will appear. Enter a four-character reference that is
significant to your operators, such as “LASR” for laser printer output or “FULL” for full
resolution or “500” for the actual resolution. Pad with spaces if the reference contains less than
four displayable characters. ( No <CR> is required, after the fourth character is entered the
cursor will automatically move to the next prompt.)
Next, the prompt “Divisor:” will appear. Enter four divisor digits. The decimal point appears
automatically after the first digit and does not need to be entered. (No <CR> is required.)