Filter
Top Products
BDM-610000050 Rev A Chapter 1: Introduction 5
Ordering Information
The CMX58886CX cpuModule is available with a 1.0 GHz processor and 256 or 512 MB of DDR SDRAM. The
cpuModule can also be purchased as part of an Intelligent Data Acquisition Node (IDAN™) building block, which
consists of the cpuModule and a milled aluminum IDAN frame. The IDAN building block can be used in just
about any combination with other IDAN building blocks to create a simple but rugged PC/104 stack. Refer to
Appendix C, IDAN™ Dimensions and Pinout, for more information. The CMX58886CX cpuModule can also be
purchased as part of a custom-built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition
Node. Contact RTD for more information on its high reliability PC/PCI-104 systems.
CMX58886CX Model Options
The basic cpuModule model options are shown below. Refer to the RTD website (www.rtd.com) for more
detailed ordering information.
Cable Kits and Accessories
For maximum flexibility, RTD does not provide cables with the cpuModule. You may wish to purchase the
CMX58886CX cpuModule cable kit (P/N XK-CM65), which contains:
• Multi-function utility harness (keyboard socket, battery, reset, speaker)
• Two serial port cables (DIL-10 to DSUB-9)
• Parallel port cable (DIL-26 to DSUB-25)
• Two IDE cables
• VGA monitor cable (DIL-10 to high density 15-pin DSUB)
• Power cable (DIL-12 to wire leads)
• Two USB cables (5-pin SIL to USB A)
• Audio Cable (DIL-10 to three Mini-Jacks)
• One Ethernet cable (DIL-10 to RJ-45)
A floppy drive cable kit (P/N XK-CM49) is also available for connecting to to the multiPort. This cable kit comes
with:
• 3.5” HDD Floppy Drive with a multiPort interface board
• Two floppy cables
For additional accessories, refer to the RTD website.
Table 1 CMX58886CX cpuModule Model Options
Part Number Description
CMX58886CX1000ER-512 1.0 GHz, 512MB DDR-SDRAM cpuModule
CMX58886CX1000ER-256 1.0 GHz, 256MB DDR-SDRAM cpuModule