IBM CMX58886CX Switch User Manual


 
BDM-610000050 Rev A Chapter 1: Introduction 9
Block Diagram
The next figure shows a simplified block diagram of the CMX58886CX cpuModule.
Figure 2 CMX58886CX cpuModule Simplified Block Diagram
You can easily customize the cpuModule by stacking PCI-104 modules such as video controllers, modems, LAN
controllers, or analog and digital data acquisition modules. Stacking PCI-104 modules onto the cpuModule
avoids expensive installations of backplanes and card cages, and preserves the module's compactness.
The cpuModule uses the RTD Enhanced AMI BIOS. Drivers in the BIOS allow booting from floppy disk, hard disk,
ATA/IDE Disk Chip, or boot block flash, thus enabling the system to be used with traditional disk drives or
nonmechanical drives. Boot from USB devices and network are also supported.
The cpuModule and BIOS are also compatible with most real-time operating systems for PC compatible
computers, although these may require creation of custom drivers to use the aDIO and watchdog timer.
Intel Pentium M
1.4/1.1 GHz
855 GME
NorthBridge
Super I/O
DDR SDRAM
333 MHz w/ ECC
2 x USB 2.0
RTD aDIO/
Watchdog
2 x RS-232/422/485
AC97 Audio
EIDE
Floppy Drive
Keyboard/Mouse
RTD Enhanced BIOS/
Failsafe Boot ROM
LPC Bus
Parallel Port
SVGA/
LVDS Flat Panel
ICH-4
South Bridge
10/100 Ethernet
PCI Bus 32-bit, 33 MHz