IBM i Series 1200 Laptop User Manual


 
Increasing memory
4. Install the DIMM into the memory slot.
Note: To avoid damaging the DIMM, do not touch its contact
edge.
a. Find the notch on the side of the DIMM.
b. With the notched end of the DIMM toward the right side of
the socket, insert the DIMM, at an angle or approximately
20°, into the socket; then press it firmly (1).
c. Pivot the DIMM until it snaps into place (2).
1
2
5. Replace the memory slot cover over the memory slot, aligning
the back side of the cover first as shown; then tighten the
screws.
6. Replace the battery pack.
7. Turn the computer over again, power on the computer.
8. Confirm that the new memory size is detected:
Extending the features of your computer 53