Filter
Top Products
EM78P468N/EM78P468L
8-Bit Microcontroller
Product Specification (V1.5) 02.15.2007
• 9
(This specification is subject to change without further notice)
6.1.5 R4/RSR (RAM Select Register)
(Address: 04h)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
RBS1 RBS0 RSR5 RSR4 RSR3 RSR2 RSR1 RSR0
Bits 7 ~ 6 (RBS1 ~ RBS0): determine which bank is activated among the four banks.
See the data memory configuration in Fig. 6-2. Use the BANK instruction (e.g. BABK 1)
to change banks.
Bits 5 ~ 0 (RSR5 ~ RSR0): used to select up to 64 registers (Address: 00~3F) in
indirect addressing mode. If no indirect addressing is used, the RSR can be used as an
8-bit general purpose read/writer register.
6.1.6 R5/Port 5 (Port 5 I/O Data and Page of Register Select
(Address: 05h)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
R57 R56 R55 R54 − − − IOCPAGE
Bits 7~4: 4-bits I/O registers of Port 5
User can use the IOC50 register to define each bit either as input or output.
Bits 3~1: Not used
Bit 0 (IOCPAGE): change IOC5 ~ IOCF to another page
IOCPAGE = “0” : Page 0 (select register of IOC 50 to IOC F0)
IOCPAGE = “1” : Page 1 (select register of IOC 61 to IOC E1)
6.1.7 R6/Port 6 (Port 6 I/O Data Register)
(Address: 06h)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
R67 R66 R65 R64 R63 R62 R61 R60
Bits 7~0: 8-bit I/O registers of Port 6
User can use the IOC60 register to define each bit either as input or output.
6.1.8 R7/Port 7 (Port 7 I/O Data Register)
(Address: 07h)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
R77 R76 R75 R74 R73 R72 R71 R70
Bits 7~0: 8-bit I/O registers of Port 7
User can use the IOC70 register to define each bit either as input or output.