Filter
Top Products
10
Adjusting the image
If necessary, adjust the height of the projector by pressing the elevator foot
release button to extend the foot.
If necessary, rotate the leveling foot located at
the rear of the projector.
Avoid placing your hands near the hot e
xhaust vent at the side of the
projector.
Position the projector the d
esired distance from the screen at a 90 degree
angle to the screen.
See the table listing screen sizes and distances on page 6.
Adjust the zoom or focus.
If the image is not square, first make sure
that the projector is perpendicular
to the screen. If the image is larger or smaller on the top or bottom edge of
the screen, press the top Keystone button to reduce the upper part of the
image, and press the bottom Keystone button to reduce the lower part.
If the left or right side of the screen is larger
or smaller the other, you can
turn the projector to the left or to the right a few degrees to square the
image.
Adjust the Contrast or Brightness in the Basic Picture menu (on page 32).
For Aspect Ratio, keep in mind that DVD players must be configured for
16:9
in order to view the highest quality image (on page 11).
adjust height
release button
elevator foot
adjust distance
adjust zoom or focus
zoom (rear ring)
focus (front ring)
adjust keystone
adjust Basic Picture menu