Filter
Top Products
34
Setup menu
Language: allows you to select a language for the onscreen display.
LiteBoard Wand: allows you to control the operation of the LiteBoard Wand
(on page 13).
Network:
allows you to setup network settings. See page 38 for details on
network configuration and operation.
• DH
CP: turns the DHCP on or off.
• IP
Address: assign Network IP Address.
• Subnet Mask: assign Network Subnet Mask.
• Default Gateway:
assign Network Default Gateway.
• WINS
Host Name Lookup: turns WINS Host Name Lookup on or off.
• Host Name: displays the host name.
• MAC Address:
displays network MAC Address value.
• Show Network Messages:
turns network messages on or off. Network
messages display the projector’s IP address (and host name if enabled)
when the projector is also displaying source messages.
• Restart Network...: restarts the network.
• Network Factory Reset...: performs factory reset.
Key Click:
turns the key click sound on or off. When this setting is on,
pressing keys on the keypad causes the projector’s speaker to play a “click”
sound.
Custom Key: allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and
press Select to choose a different one.
• Blank Screen: displays an empty screen.
• Mute:
turns off all sound.
• Aspect Ratio: toggles among 4:3, 16:9, and Native (on page 11 and on
page 32).
• Source: cycles through available sources.
• Auto Image: resets the projector to the source (on page 28).
• Freeze Sc
reen: pauses the projected image.
• Source I
nfo: the default action. Shows the Source Info menu.
• Projector Info: shows the Projector Info menu.
• Ov
erscan: removes noise around the image.
• AV M
ute: enables or disables AV Mute function.
• Closed Captions: enables or disables Closed Captions.
Blank Key:
select what to display when the blank key on the remote is
pressed: your custom snapshot, a solid color screen (blue, black or white),
the factory logo screen, a timer, or test patterns. The timer option is useful
for classroom tests or break times during meetings.
Source Key Enable: enables or disables Source Keys on the optional
Commander-2 remote.
AC Power On:
when this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Auto Off Time: automatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Screen Save Time: automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns
when an active source is detected or a remote or keypad button is pressed.
Sleep Timer: Allo
ws the projector to automatically power off after it has been
on for a specified amount of time.
Always-On Functions: allows you to control which projector functions will
work even when the projector is in standby (powered off but connected to
AC Power). Press Up or Down to highlight the function you want to
change, then press select or left and right to change the function to either
Yes or No. Press menu when done. Note that some functions must always
have the same value; in this case when you change one value, other values
in the submenu may also change automatically.
Lamp Low Power: to
ggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter.