InFocus LP260 Projector User Manual


 
5
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
The projector must be within 10 feet (3 m) of your power
source and within 6 feet (1.8 m) of your computer.
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear” on page 33
to reverse the image.
2
Position the projector the desired distance from the screen.
The distance from the lens of the projector to the screen and
the zoom setting determine the size of the projected image.
Figure 3 and Table 1 show projected image sizes.
FIGURE 3
Projected image sizes
3
Make sure the projector and the computer are turned off.
4.6’ (1.4m)
7.8’ (2.4m)
13.1’ (4.0m)
19.7’ (6.0m)
26.3’ (8.0m)
150”
200”
167”
H
2
125”
100”
83”
50”
60”
36”
30”
H1
Max Zoom
Min Zoom
Table 1:
Image Size, Width and Height
Screen Size
(W x H) mm
30” 60” 100” 150” 200”
610 x 457 1219 x 914 2032x1524 3048x2286 4064x3048
Height (H1) 16.6”
(422mm)
33.2”
(844mm)
55.4”
(1407mm)
83.1”
(2110mm)
110.8”
(2814mm)
Height (H2) 1.4”
(35mm)
2.8”
(70mm)
4.6”
(117mm)
6.9”
(176mm)
9.2”
(234mm)