Filter
Top Products
27
Video System menu
1
Press the
menu
button, navigate to the System menu, then
press the
select
button.
The “Video System” menu appears.
2
Press the
point down
button and position the red arrow by the
desired source.
When the video signal is from the Video or S-Video jack:
Auto
In this mode, the projector automatically detects the incoming
video source and adjusts itself to optimize performance. When
the video system is PAL-M or PAL-N, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector can’t display the proper video signal, select the
broadcast signal format from the menu.
system menu