Filter
Top Products
20
Using the Projector
3
Move to the parameter you want to change using the
point
up/
down
buttons, and adjust each setting using the
point right/left
buttons.
4
Navigate to “Save” and press the
select
button.
The parameter is memorized in the selected mode.
5
To activate the mode, select it in the System Select menu (see
“System Menu” on page 18.)
To t a l L i n e s
The number of vertical lines.
Horiz. Size
The number of dots in one horizontal period.
H Position/V Position
The left/right and up/down position of the image.
Clamp
The clamp level. If the image has dark bars, use this adjustment.