Filter
Top Products
8
Setting up the Projector
Do you want to control the computer’s mouse from the projector’s
remote or keypad?
If your computer has a USB connector and is running Windows 98,
use the USB mouse cable.
NOTE: The USB mouse is
supported for use with
Windows 98 only.
1
Plug the one end of the USB mouse cable into the mouse con-
nector on your computer.
2
Plug the other end of the USB mouse cable into the USB con-
nector on the projector.
You must have the appropriate USB drivers installed on your
computer to use the USB feature. Windows 98 ships with the
appropriate drivers.
NOTE: See page 13 for details on
using the remote to control your
computer.
F
IGURE 6
Connecting a mouse via the USB connector
If your computer has a PS/2 connector, use the PS/2 mouse adapter
and the RS-232 cable.
1
Plug one end of the PS/2 mouse adapter into the mouse con-
nector on your computer.
2
Plug the other end of the PS/2 mouse adapter into the
RS-232 cable.
3
Plug the other end of the RS-232 cable into the RS-232 connec-
tor on the projector.