InFocus LP770 Projector User Manual


 
37
Problem: Projected colors don’t match the computer or video
player’s colors
Just as there are differences in the displays of different moni-
tors, there are often differences between the computer image
and the projected image. Adjust the brightness, tint and/or
contrast from the Picture menu. See “Brightness” on page 21,
“Color” on page 22 and “Contrast” on page 21.
Problem: Lamp seems to be getting dimmer
The lamp begins to lose brightness when it has been in use for
a long time. Replace the lamp as described in “Replacing the
Projection Lamp” on page 31.
Problem: Lamp shuts off
A minor power surge may cause the lamp to shut off. Unplug
the projector, wait at least 10 minutes, then plug it back in.
Make sure the vents are not blocked.
The most current troubleshooting information can be found in
the Service and Support section of our website at
http://www.infocus.com/service.
Before calling your dealer or InFocus Technical Support for assis-
tance, please have the following information available:
the projector’s serial number (located on the bottom label)
the resolution of your computer.
Call InFocus Technical Support at
1-800-799-9911
between 6 a.m.
and 6 p.m. PST, Monday through Friday. Support is available in
North America after hours and on weekends for a fee at
1-888-592-6800
.
In Europe, call InFocus in The Netherlands at
(31) 35-6474010
between 8 a.m. and 6 p.m. Central European Time. Support is
available in Europe after hours and on weekends for a fee at
(
31) 35-6474001
.
In Asia, call
(65) 332-0659
between 9:30 a.m. and 5:30 p.m.
Or, send us an e-mail at
techsupport@infocus.com