Filter
Top Products
10
Setting up the Projector
Connecting a Video Player
The LP770 has 3 different connections for video players: S-video,
composite video, and BNC (the S-video and BNC connections
require cables not included with the LP770).
1
If your video player uses a round, one-prong composite video
connector, plug the composite video cable’s yellow connector
into the “video-out” connector on your video player. This con-
nector may be labeled “To Monitor.” If you’re using an S-
video cable, connect it to the “S-video out” connector on the
video player. If you’re using a BNC cable, connect it to the
“BNC-video out” connector on the video player (Figure 9).
CAUTION: Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
2
Plug the other yellow connector into the
Video 2 In
composite
video connector on the projector. If you’re using S-video, plug
the other end of the cable into the
Video 1 or 2 In
“S-video”
connector on the projector. If you’re using BNC, plug the other
end of the cable into the
Video 1 In
“BNC” connector on the
projector.
FIGURE 9
Connecting the projector to a video player
3
Plug the audio cable’s white connector into the left “audio
out” connector on your video player. Plug the cable’s red con-
nector into the right “audio out” connector on the video
player.