InFocus LP770 Projector User Manual


 
9
FIGURE 7
Connecting a mouse via the PS/2 connector
If your Macintosh computer has an ADB connector, use the ADB
mouse adapter and the RS-232 cable.
NOTE: You do not need to restart
your computer after connecting a
USB mouse to use it (it is hot-plug-
gable). You must restart your com-
puter after plugging in a PS/2 or
ADB mouse.
1
Plug one end of the ADB mouse adapter into the mouse con-
nector on your computer.
2
Plug the other end of the ADB mouse adapter into the
RS-232 cable.
3
Plug the other end of the RS-232 cable into the RS-232 connec-
tor on the projector.
FIGURE 8
Connecting a mouse via the ADB connector
Now you’re ready to power up the projector and your computer.
Skip to “Powering up the Projector and Adjusting the Image” on
page 11.