Filter
Top Products
Problem Solving 5-15
Post Error Codes and messages (Continued)
Code Error Message
0B33 Power Unit Fan 1 Alarm occurred
0B34 Power Unit Fan 2 Alarm occurred
0B46 ESMINT not configured
0B50 CPU #1 with error taken off line
0B51 CPU #2 with error taken off line
0B5F Forced to use CPU with error
0B60 DIMM group #1 has been disabled
0B61 DIMM group #2 has been disabled
0B62 DIMM group #3 has been disabled
0B63 DIMM group #4 has been disabled
0B6F DIMM group with error is enabled
0B70 The error occurred during temperature sensor reading
0B71 System Temperature out of range
0B74 The error occurred during voltage sensor reading
0B75 System Voltage out of range
0B7C The error occurred during fan sensor reading
0B80 BMC Memory Test Failed
0B81 BMC Firmware Code Area CRC check failed
0B82 BMC core hardware failure
0B83 BMC IBF or OBF check failed
0B90 BMC Platform Information Area Corrupted
0B91 BMC update firmware corrupted
0B92 Internal Use Area of BMC FRU corrupted
0B93 BMC SDR Repository empty
0B94 IPMB signal lines do not respond
0B95 BMC FRU device failure
0B96 BMC SDR Repository failure
0B97 BMC SEL device failure
0BB0 SMBIOS - SROM data read error
0BB1 SMBIOS - SROM data checksum bad
0BD0 1
st
SMBus device address not acknowledged
0BD1 1
st
SMBus device Error detected
0BD2 1
st
SMBus timeout