Intel 82550 Switch User Manual


 
68 Intel 8255x 10/100 Mbps Ethernet Controller Family Open Source Software Developer Manual
Host Software Interface
BYTE 2: Adaptive IFS. This byte indicates the minimum number of PCI clocks counted
between sending two transmit frames on the wire. The resolution of this counter is 8 PCI
clocks making the range from 0 to 2040 PCI clocks.
Default - 0.
Recommended - 0.
BYTE 3.
Bit 3 - Terminate Write on Cache Line. This bit is reserved on the 82557 and should be set
to 0.
However, when this bit is set on the 82558 or a later generation controller, the device
attempts to terminate its write accesses on cache lines. This may yield lower PCI
throughput in systems which are not extremely cache line oriented. This bit should
therefore be set only in systems that are extremely cache line oriented.
0 = Terminate Write on Cache Line disabled.
1 = Terminate Write on Cache Line enabled.
Default - 0 (Terminate Write on Cache Line disable).
Recommended - 0.
Bit 2 - Read Alignment Enable. This bit is reserved on the 82557 and should be set to 0.
However, when this bit is set on the 82558 and later generation controllers, the device
attempts to align its read accesses to cache lines. This may yield lower PCI throughput in
systems that are not extremely cache line oriented. Thus, this bit should be set only in
Table 44. 82558 and 82559 Dual-Port FIFO Settings - Receive
Configuration Value (Nibble Wide) Receive FIFO Limit
Binary (Receive Bits 3:0) Dwords Bytes
0 0 0 0 32 128
0 0 0 1 30 120
0 0 1 0 28 112
0 0 1 1 26 104
0 1 0 0 24 96
0 1 0 1 22 88
0 1 1 0 20 80
0 1 1 1 18 72
1 0 0 0 16 64
a
a. This line represents the default values.
1 0 0 1 14 56
1 0 1 0 12 48
1 0 1 1 10 40
1 1 0 0 8 32
1 1 0 1 6 24
1 1 1 0 4 16
1 1 1 1 2 8