Filter
Top Products
100 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Defining Multiple STP Interface Settings
Network Administrators can assign Multiple STP Interface Settings in the Interface
Settings Page.
To define Interface settings:
1. Click Layer 2 > Multiple STP > Interface Settings. The Interface Settings Page
opens:
Figure 73. Interface Settings Page
The Interface Settings Page contains the following fields:
• Instance ID — Lists the MSTP instances configured on the device. Possible field
range is 0-7.
• Interface — Displays the interface for which the MSTP settings are displayed. The
possible field values are:
— Port — Specifies the port for which the MSTP settings are displayed.
— LAG — Specifies the LAG for which the MSTP settings are displayed.
• Port State— Indicates whether the port is enabled for the specific instance. The
possible field values are:
— Enabled — Enables the port for the specific instance.
— Disabled — Disables the port for the specific instance.
• Type — Indicates whether the port is a Boundary, Master or an internal port. The
possible field values are:
— Boundary Port — Indicates that the port is a Boundary port. A Boundary port
attaches MST bridges to LANs in an outlying region. If the port is a Boundary