Filter
Top Products
40 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Defining LAG Members
The LAG Membership Page contains fields for configuring parameters for configured
LAGs. The device supports up to eight ports per LAG, and ten LAGs per system. LAGs
can be configured only on external ports.
To define LAG parameters:
1. Click Layer 2 > Interface > LAG Membership. The LAG Membership Page
opens.
Figure 27. LAG Membership Page
The LAG Membership Page contains the following fields:
• LAG — Displays the ports which can be assigned to the LAG.
• Name — Indicates the LAG name.
• Link State — Displays the status of the link.
• Member — Displays the ports which are currently configured to the LAG.
2. Define the relevant fields.
3. Click . The LAG membership settings are saved, and the device is
updated.