Filter
Top Products
34 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
• Operational Status — Indicates the port operational status. Possible field values are:
— Suspended — Indicates the port is currently active, and is not receiving or
transmitting traffic.
— Active — Indicates the port is currently active and is receiving and transmitting
traffic.
— Disable — Indicates the port is currently disabled, and is not receiving or
transmitting traffic.
• Admin Speed — Displays the configured rate for the port. The port type determines
what speed setting options are available.
• Current Port Speed — Displays the actual synchronized port speed (bps).
• Admin Duplex — Indicates port duplex mode can be either Full or Half. Full
indicates that the interface supports transmission between the device and its link
partner in both directions simultaneously. Half indicates that the interface supports
transmission between the device and the client in only one direction at a time.
• Current Duplex Mode — Displays the currently configured port duplex mode.
• Current Duplex Mode — Displays the current Duplex Mode.
• Current Auto Negotiation — Displays the current Auto Negotiation Mode.
• Admin Advertisement — Defines the auto-negotiation setting the port advertises.
The possible field values are:
— Max Capability — Indicates that all port speeds and Duplex mode settings are
accepted.
— 10 Full — Indicates that the port advertises for a 10 mbps speed port and full
duplex mode setting.
— 100 Full — Indicates that the port advertises for a 100 mbps speed port and full
duplex mode setting.
— 1000 Full — Indicates that the port advertises for a 1000 mbps speed port and
full duplex mode setting.
• Current Advertisement — The port advertises its speed to its neighbor port to start
the negotiation
process. The possible field values are those specified in the Admin
advertisement field.
• Neighbor Advertisement — Indicates the neighboring port’s advertisement settings.
The field values are identical to the Admin Advertisement field values.
• Current Back Pressure — Displays the current Back Pressure setting.
• Current Flow Control — Displays the current Flow Control setting.
• Current MDI/MDIX — Displays the current MDI/MDIX setting.Define the
relevant fields.
2. Click . The port configuration settings are defined, and the device is
updated.