Filter
Top Products
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 151
• Refresh Rate — Defines the amount of time that passes before the interface statistics
are refreshed. The possible field values are:
— No Refresh — Indicates that the Interface statistics are not refreshed.
— 15 Sec—Indicates that the Interface statistics are refreshed every 15 seconds.
— 30 Sec — Indicates that the Interface statistics are refreshed every 30 seconds.
— 60 Sec — Indicates that the Interface statistics are refreshed every 60 seconds.
• Received Bytes (Octets) — Displays the number of octets received on the interface
since the device was last refreshed. This number includes bad packets and FCS octets,
but excludes framing bits.
• Received Packets — Displays the number of packets received on the interface,
including bad packets, Multicast and broadcast packets, since the device was last
refreshed.
• Broadcast Packets Received — Displays the number of good broadcast packets
received on the interface since the device was last refreshed. This number does not
include Multicast packets.
• Multicast Packets Received — Displays the number of good Multicast packets
received on the interface since the device was last refreshed.
• CRC & Align Errors — Displays the number of CRC and Align errors that have
occurred on the interface since the device was last refreshed.
• Undersize Packets — Displays the number of undersized packets (less than 64
octets) received on the interface since the device was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets)
received on the interface since the device was last refreshed.
• Fragments — Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
• Jabbers — Displays the
total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral octet (Alignment Error) number. The field range to detect
jabbers is between 20 ms and 150 ms.
• Collisions — Displays the number of collisions received on the interface since the
device was last refreshed.
• Drop Event — Displays the number of dropped events that have occurred on the
interface since the device was last refreshed.
• Frames of 64 Bytes — Number of 64-byte frames received on the interface since the
device was last refreshed.
• Frames of 65 to 127 Bytes — Number of 65 to 127 byte frames received on the
interface since the device was last refreshed.
• Frames of 128 to 255 Bytes — Number of 128 to 255 byte frames received on the
interface since the device was last refreshed.