Filter
Top Products
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 121
Aggregating Policiers
After a packet is classified, the policing process begins. A policier specifies the bandwidth
limit for incoming traffic on the classified flow and actions are defined for packets that
exceed the limits. These actions include forwarding packets, dropping packets, or
remarking packets with a new DSCP value. The device supports per flow and aggregate
policiers.
Aggregate policers enforce limits on a group of flows. An aggregate policer cannot be
deleted if it is being used in a policy map. The Aggregated Policier Page contains
information for defining the bandwidth limits and define actions to take on packets that do
not meet the requirements.
To configure Aggregated Policiers:
1. Click QoS > Advanced Mode >Aggregated Policier. The Aggregated Policier
Page opens:
Figure 87. Aggregated Policier Page
The Aggregated Policier Page contains the following fields:
• Delete — Deletes Aggregated Policy. The possible field values are:
— Checked — Deletes the selected Aggregated Policy.
— Unchecked — Maintains the current Aggregated Policy.
• Aggregate Policer Name — Specifies the aggregate policer name.
• Ingress CIR — Defines the CIR in kbits per second.