Filter
Top Products
14
Chapter 2. Hardware Installation
2.1 Mounting the motherboard
!INSTALLATION WARNING!
Use Caution When Installing the ServerBoard into the System Chassis
The components underneath the PS/2 Mouse/Keyboard connectors around the mounting hole are very
FRAGILE and can be knocked off of their soldered positions, resulting in IRREPARABLE DAMAGE
during installation when sliding the board into a system chassis.
Gently install the ServerBoard into the chassis, and use a Mylar Sheet to cover and protect the underside of
the ServerBoard during installation. Take care NOT to scrape the bottom of the ServerBoard on the chassis
stand-offs and mounting holes.
These components are necessary for many different operations, including the Mouse and the Keyboard. If
you damage any of these chips, one of the symptoms is that the ServerBoard will NOT respond to key
strokes through the PS/2 port and the ServerBoard will have to be replaced. Other symptoms include the
loss of response or functionality in any of the rear I/O ports. Contact your authorized dealer for more
information.
The Damage noted here in this WARNING may require the ServerBoard to be replaced. Due to the Nature
of the Damage, this may be considered Out-of-Warranty Damage. Make certain that ALL documented
procedures are followed correctly.