Filter
Top Products
20
2.3 Installing the memory
2.3.1 DIMM combination
The following diagram indicates the locations of memory sockets, captioned 1
st
_Pair_A through 3
rd
_Pair_B.
Types of memory supported:
Six sockets of 184-pin 2.5Volt DDR DIMM supporting DDR-333/266.
As indicated on the diagram, they are running on dual channel memory bus and two-way interleaved
memory banks. Therefore, the memory must be INSTALLED IN PAIRS. The first pair must be installed
in the “1
st
_Pair_A” and “1
st
_Pair_B” locations as indicated in the diagram. The second pair must be
installed in the “2
nd
_Pair_A” and “2
nd
_Pair_B” locations, and so on. Be sure that every memory pair is of
the same speed, size and rank.