Filter
Top Products
56K V.92 Data, Fax, and Voice Chipset
Programmer’s Guide Intel Confidential 59
+PCW=m 0
Call Waiting Enable: This command controls the action to be taken upon detection
of call waiting in a V.92 DCS.
m = 0 Toggle V.24 Circuit 125 and collect Caller ID if enabled by +VCID
m = 1 Hang up
m = 2 Ignore V.92 call waiting
+PMH=m 0
Modem on Hold Enable: This command controls whether or not modem on hold
procedures are enabled during V.92 operation.
m = 0 Enables V.92 modem on hold
m = 1 Disables V.92 modem on hold
+PMHT=m none
Modem on Hold Timer: This command controls whether or not the modem will
grant or deny a Modem on-hold (MOH) request as well as setting the Modem-on-
Hold-Timeout.
m = 0 Deny V.92 Modem-on-hold Request
m = 1 Grant MOH with 10 second timeout
m = 2 Grant MOH with 20 second timeout
m = 3 Grant MOH with 30 second timeout
m = 4 Grant MOH with 40 second timeout
m = 5 Grant MOH with 1 minute timeout
m = 6 Grant MOH with 2 minute timeout
m = 7 Grant MOH with 3 minute timeout
m = 8 Grant MOH with 4 minute timeout
m = 9 Grant MOH with 6 minute timeout
m = 10 Grant MOH with 8 minute timeout
m = 11 Grant MOH with 12 minute timeout
m = 12 Grant MOH with 16 minute timeout
m = 13 Grant MOH with indefinite timeout
Table 3-4. Data Mode Command Descriptions (Continued)