Filter
Top Products
Intel® Packet Protect User’s Guide
32
2. Click Edit Rule. The Edit Rule dialog box appears.
3. Click Customize Destination. The Customize Destination Workgroups dia-
log box appears.
4. Click New.
5. In the Destination workgroup box, type a new name for the destination
workgroup.
6. To add computers to the destination workgroup, in the Add computers by
text box, select how you want to identify computers for addition to the des-
tination workgroup: by IP address or by computer name.
Note
: Check with your network administrator to determine how to
add computers to a workgroup. If the computer you want to
add to this workgroup has a permanent (or static) IP
addresses, you should probably add computers to the work-
group by IP address. If the computer you want to add uses s
dynamic IP addresses (where a temporary IP address is
assigned to a computer for each session), then you should
probably add computers to the workgroup by computer name.
7. Type the computer name or IP address for a computer you want to add to
the workgroup.
8. Click Add>>.
9. Repeat steps 5 through 8 for each computer you want to add.
10. If you need to delete a computer from the destination workgroup, select the
computer from the list on the right, then click <<Remove.
11. If desired, continue adding destination workgroups by clicking New again
and repeating Steps 4-7.
12. Click OK. The selected destination workgroup appears automatically in the
Edit Rule dialog box.