Intel SBC-370 Computer Hardware User Manual


 
LAN RJ45 Connector (CN10)
The SBC-370 is equipped with a built-in 10/100Mbps Ethernet Controller. You can
connect it to your LAN through the RJ45 LAN connector. For the location of this
connector, refer to figure 2.
Pin Number Description
1 TX+
2TX-
3. RX+
4. 75 W termination
5. 75 W termination
6. RX-
7. 75 W termination
8. 75 W termination
LED Connector for LAN (CN5)
For the location of this connector, refer to figure 2.
Pin Number Description
1 VCC
2 LAN ACT.
Fan Connector (CN13/CN14/CN15)
The SBC-370 provides one CPU cooling fan connector and two system fan connec-
tors. These connectors can supply 12V/500mA (maximum) to the cooling fan. The
connector has a rotation pin that supplies the fan's rotation signal to the system
so that the system BIOS can read the fan speed. For the location of each connec-
tor, refer to figure 2.
CN13: CPU Fan Connector
CN14: System1 Fan Connector
CN15: System2 Fan Connector
Pin Number Description
1 Fan Sensor
2 +12V
3 GND
23 Board Configuration