Filter
Top Products
Serial Port B Mode >: Specify the mode of serial port 2.
IR Duplex Mode >: Specify the mode of IR device that is connected to the IR port.
IrDA Protocol >: Specify the function mode if an IrDA mode is selected.
Onboard Parallel Port >: Specify the I/O port address of the parallel port.
Parallel Port Mode >: Used to specify the mode of parallel port. The options are:
•
Normal
(normal parallel port mode)
•
Bi-Dir
(supports bidirectional transfer)
•
EPP
(supports devices that comply with the Enhanced Parallel Port specification)
•
ECP
(supports devices that comply with the Extended Capabilities Port)
Parallel Port IRQ >: This option is used to assign certain IRQ to the parallel port. The opti
-
mal and fail-safe setting is 7.
Parallel Port DMA Channel >: This function is available only if the parallel port mode is ECP.
The optimal and fail-safe setting is 3.
Onboard IDE >: Define which onboard IDE controller channel(s) should be used. Avail
-
able options are:
Primary, Secondary, Both,andDisabled.
35 AMI BIOS Setup Menus