Filter
Top Products
POWER MANAGEMENT SETUP
Power Management/APM >: Enables or disables the Advanced Power Management feature.
Green PC Monitor Power State >: Specify the power state of the monitor after the specified pe-
riod of display-idle has ended.
Video Power Down Mode >: Specify the power state of the VESA VGA video subsystem after
the specified period of display-idle has ended.
Hard Disk Power Down Mode >: Specify the power state of the hard disk after the specified pe
-
riod of hard drive-idle has ended.
Standby Time Out (Minute) >: Specify the length of the system-idle period while the system is
in full power-on state. After this period of time has ended, the system will go into
Standby state.
Suspend Time Out (Minute) >: Specify the length of the system-idle period while the system is in
Standby state. After this period of time has ended, the system will go into Suspend state.
Throttle Slow Clock Ratio >: Specify the speed of the system clock under power saving state.
The figure is a ratio between power conserving and normal state CPU clock.
Modem Use IO Port >: Assign a port for modem.
Modem Use IRQ >: Assign an IRQ for modem.
Display Activity >: Specify if the BIOS should monitor display activity or not.
Device X >: Used to monitor or ignore specified device IRQs.
AMI BIOS Setup Menus 32