Filter
Top Products
28
(Routing Information Protocol). If the router supports RIP, it will automatically
exchange routing information with SA and it is not necessary to set a static
route. Please refer the steps and figures to set a static route.
1. Select Enable radio button in Routing Setup.
2. Enter the network in Destination network column. (e.g.
“192.168.6.0/24”)
3. Enter IP address of the gateway in Gateway column. (e.g.
“172.16.1.249”)
4. Enter the number in Hop count column. The number means how
many gateways you have to pass through.
5. Click the apply button.
In the figures, the destination network is “192.168.6.x”. And the packets will
be route in or out of the destination network through the gateway
“172.16.1.249”.
DDNS
Your Internet Service Provider (ISP) provides you at least one IP address to
use when connecting to the Internet. The address you as assigned may be
static, meaning it never changes, or more than likely dynamic, meaning it’s
likely to change periodically. How often it changes depends on your ISP. A
dynamic IP address complicates remote access since you may not know your
current WAN IP address when you want to access your network over the