Filter
Top Products
51
The progress of the initialization
will be displayed.
You can also view the progress by
returning to the main wizard
screen.
Once the initialization is complete,
the status will change to Ready.
USB HD Information
Each of formatted partitions (FAT32, EXT2 and EXT3) on the attached USB
storage drive will be shown in the USB HD information page. The naming rule
for “Mounting path” is based on the connecting port. For example, if the USB
hard drive was attached on port A and here are three formatted primary
partitions on the disk, the SA will create "USBHDA1" and "USBHDA2" mounting
path to represent each partition space.